ALCATECH RCP-2001-A Manual de usuario descargar pdf (Pagina 122)

122

RCP-2001 Description

BPM Studio

[34] Pitch Wheel

(only in RCP-2001-B)

Set the desired playback speed using the Pitch

Wheel. On the display [14] the actual speed in

BPM and the difference in percent appear. The

Wheel is only active if the [Pitch] key [24] is on

and the Pitch-LED [25] is shining.

[35] Pitch Reset

(only in RCP-2001-B)

You can put the Pitch to 0 using this key.

Reverse Side Sockets:

[36] Fade Start Input Socket

This socket usually works with all mixers that have

an available fade/start function, for example the

PIONEER series. Connect the plug (1/8 inch jack)

of the Remote Control Unit using a universal cable

to your mixer. Connect the ground device (GND

[36a]) with the ground of the mixer.

How it works:

Both players are controlled by a separated 1/8

inch stereo jack. The player starts by locking the

contact S1 (temporarily or constantly) and stops

when contact S2 is locked (temporarily or

constantly). Through program options you can

activate fade start and also stop the separate fade.

Do not set up the grip ground to the same as the

device ground! This will avoid a short circuit

between the device and the grip ground.

[36a] Device ground

Connect the device ground (GND) to the ground

of mixer.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 143 144

Sin comentarios

ALCATECH RCP-2001-A Manual de usuario Pagina 122